Cleo High Power

HPA 1200 S

Double-ended medium pressure metal halide radiators with iron and cobalt additives, emitting ozone-free radiation mainly between 300 and 400 nm. They require a ballast and an ignitor. Their run-up time is four minutes and they need a few minutes of cooling down before re-ignition. Since HPA lamps also emit UV-B and UV-C, a suitable filter should be used. High power HPA lamps require forced cooling for proper functioning, particularly when used in enclosed equipment. Burning position: horizontal /- 10 degrees.

Warning

UV radiation, like solar radiation, can cause eye and skin injury if the appropriate safety measures are not observed. Always follow the manufacturer's instructions carefully when using any tanning product or system. When replacing tanning lamps in existing equipment, always adjust the tanning times according to the equipment manufacturer's instructions for the new lamp type.

Applications

- Sun tanning

HPA 1000

HPA 2020 S

HPA 2030 S

HPA 806 S

HPA 806 S RX7s

Type	A max.	B	C	D nom.
Cap/base cap/cable
HPA 1000	22.0	315.0±5.0	83.0	147.0±2.0
HPA 1200 S	22.5	315.0±5.0	56.0	139.0±2.0
HPA 2000 S	22.0	375.0±5.0	105.0	177.0±2.0
Cap/base C10.5 cable
HPA 2020 S	22.0	350.0±5.0	83.0	185.0±3.0
HPA 2030 S	22.0	39.5±2.0	105.0	247.0±2.0

Type	HPA 806 S	HPA 1000	HPA 1200 S	HPA 2000 S	HPA 2020 S	HPA 2030 S
Cap/ base	RX7S	CAP/CABLE	CAP/CABLE	CAP/CABLE	C10.5 CABLE	C10.5 CABLE
Minignition supply voltage V	198	198	210	350	350	350
Lamp wattage W	840.0	930.0	1225.0	1920.0	1920.0	1920.0
Lamp current W	7.20	8.00	10.00	8.50	8.50	8.50
UV-A irrad. uW/cm²	1600	1800	2500	4200	4100	4200
UV-A irrad. max. uW/cm²	600	550	550	950	950	950
UV-A irrad. max. uW/cm²	240	200	300	400	400	400
Erythemal irrad. < 320 nm uW/cm²	2660	3100	4580	7000	6340	7000
Erythemal irrad. < 320 nm uW/cm²	11.8	12.7	18.0	28.4	28.6	28.4
Ratio FDA3/ FDA2	3	3	3	3	3	3
Lamp life 50% h	750	750	750	750	750	750
Maximum permiss base/ pinch temp. degr.C	350	350	350	350	350	350
Maximum permiss bulb temp. degr.C	950	950	950	950	950	950
Nett weight g	19.5	49.0	49.0	60.0	48.0	63.0
Ordering number	9280 5720 6000	9280 7530 5100	9280 7900 6000	9280 7890 6000	9280 5630 6000	9280 5570 6000
EOC	9280 5570 6000	191 090	191 304	191 274	195 357	195 371
All CLEO products are measured at 5 hours according to IEC 61228.

Fig.1

Fig.2

Fig.3

Lamp	Ballast Type	Ordering no.	Ignitor Type	Fig.

HPA 806 S	2 x BHA 400 L33	9136 049 604..	MZN 1000S Bag Turgi	2
HPA 1000	BHL 1000 L65	9136 060 104..	MZN 1000S Bag Turgi ZG10 SE600 May and Criste	1
HPA 1200 S	BHL 1000 L65 BHL 250 L40	9136 060 104.. 9136 039 204..	MZN 1000S Bag Turgi	2
HPA 2000 S	BHL 2000 L18	9136 070 089..	380 MZN 4000 Bag Turgi 380 MZN 2000S Bag Turgi ZGV10 SE600 May and Criste	3
HPA 2020 S	BHL 2000 L18	9136 070 089..	380 MZN 4000 Bag Turgi 380 MZN 2000S Bag Turgi ZGV10 SE600 May and Criste	3
HPA 2030 S	BHL 2000 L18	9136 070 089..	380 MZN 4000 Bag Turgi 3 380 MZN 2000S Bag Turgi ZGV10 SE600 May and Criste	3

To download the pdf file about this product click here